3M
2060
Lacquer Masking Tape
3M masking tape 2060 is a 6mil tape, primarily used to mask lacquer paints from surfaces and to mask lacquered surfaces from other types of paints and lacquers. Removes with little or no adhesive transfer to most surfaces for up to three days after application, even when subjected to sunlight exposure. Tape should be removed at a 90° angle. It remains supple and resists curl off when coated with paints and lacquers. It resists paint and lacquer flaking when the tape is removed from the job. It should not be subjected to prolonged outdoor exposure. Tape may become very difficult to remove. It is manufactured in an ISO 9002 registered plant to meet worldwide quality standards.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | Rubber |
| Thickness | 6 Mils |
| Tensile | 24.00 lbs/in |
|---|---|
| Elongation | 8.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 34 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp |
Product Features
- Instant adhesion
- Sticks easily/helps reduce labor
- Good holding power
- Helps resist lifting or curling/helps reduce rework
- Conformability
- Easy handling/helps reduce time involved
- Easy tear
- Good handling/helps reduce waste
- Seal/release treatment
- Helps resist curl off
- Controlled unwind
- Paint anchorage
- Helps resist paint flaking
- Tape remains flexible
- Helps resist slivering off the job
Adhesive Tape Applications
- Used to mask lacquer paints from surfaces and to mask lacquered surfaces from other types of paints and lacquers
- Hold to and clean removal from stainless steel & most powder coated paints
- Very good paint line
Adhesive Tape Colors
- Green
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.