3M
2310
***Discontinued*** Paint Masking Tape
3M discontinued this product & recommends 231, 2693 or 2380 as alternatives 3M masking tape 2310 is a 7.5 mil high temperature tape with high adhesion suitable for most paint applications. This strong, smooth masking tape embodies all the features that are desireable of a paint masking tape. Tape should not be subjected to outdoor exposure or prolonged periods of sunlight. Tape may become very difficult to remove.
| Backing/Carrier | Crepe Paper |
|---|---|
| Adhesive | Rubber |
| Thickness | 7.5 Mils |
| Tensile | 27.00 lbs/in |
|---|---|
| Elongation | 10.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 36 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 325° F |
| Max Long-Term Temp |
Product Features
- Unique balance of adhesive and backing provides a high degree of resistance to tearing or slivering on removal
- Adhesive has high shear strength on fiberboard and paper surfaces and good shear strength to boxboard
- Rubber adhesive has instant adhesion, good holding power and superior adhesive transfer resistance
- Controlled crepe paper backing offers smoothness, dead stretch and conformability
- Backing saturant is solvent and moisture resistant, easy tear and sliver resistant
- Special backside treatment has controlled unwind
- Excellent conformability and easy tear
- Can be used at bake temperatures up to 325°F for one hour
- Sticks easily/ allows fast application
- Resists lifting or curling/ helps reduce rework
- Clean removal/ reduces labor
- Good surface contact/ secure holding
- Minimal recovery/ reduces rework
- Easy handling/ minimizes time involved
- Resists bleed-through
- Reduces waste
Adhesive Tape Colors
- Tan
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.