3M
280 Safety
Safety WalkT Fine Texture Anti-Slip Tape
Safety WalkT 280 is a white 23 mil, fine textured, slip-resistant surface with a pressure-sensitive adhesive backing providing enhanced safety and comfort in light- and barefoot-traffic areas. The special acrylic adhesive coating is formulated specifically for wet areas such as showers, tubs, surfboards, and pools.
3M Safety WalkT slip-resistant tapes and treads adhere to clean, dry surfaces without wrinkling, curling, tearing, shrinking, or lifting. They offer proven durability for a long life. The pressure sensitive adhesive backing makes it easy to apply tapes without the use of anchoring. Safety WalkT products meet or exceed the standards and recommended guidelines for slip resistance in accordance with ASTM requirements. Safety WalkT products are available in standard rolls and pre-cut treads, or can be custom converted into specialty sizes and shapes.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 23 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Designed specifically for wet, barefoot traffic areas
- Non-mineral, fine-textured, slip-resistant vinyl surface
- High performance, water-resistant, acrylate adhesive is ideal for wet conditions
- Resists most chemicals including bath oils
- Meets or exceeds OSHA/ADA Coefficient of Friction
Markets Served
- Commercial
- Construction
- Marine
- Recreational
Adhesive Tape Applications
- Shower and tub floors
- Surfboards
- Around hot tubs and pools
- Any wet, barefoot traffic area
Adhesive Tape Colors
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.