3M
464XL
***Discontinued*** Double Coated Tape
Discontinued product possible alternative 9925XL A 3.0 mil. tape with R-70 rubber adhesive and a thin paper tissue backing primarily used for mounting, joining, splicing and tacking carpet edges. 464XL is ideal for applications where an aggresive rubber-resin adhesive with high initial adhesion is reqiured. R- 70 is a soft rubber-resin pressure-sensitive adhesive system. It features high initial adhesion to a wide variety of materials, along with a thin tissue that reinforces the adhesive, allowing its use in many 3M double coated tape dispensers. 464XL also consists of an extended liner (XL), that extends beyond the width of the adhesive to provide easy liner starting and removal. The extended liner also provides a dry edge on each side of the tape for easy removal, however, this decreases the adhesive coating by 1/4in. overall. The liner is printed with the message, "Remove to Expose Adhesive". This product is not recommended for direct exposure to sunlight or other sources of ultra violet light. Due to it's high adhesion, 464XL will normally transfer adhesive or delaminate when removed from most surfaces.
| Backing/Carrier | Tissue |
|---|---|
| Adhesive | Rubber |
| Thickness | 3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 60 oz/in |
| Adhesion (unwind) | 60 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp | 150° F |
Product Features
- Paper tissue backing
- 3.0 mil. R-70 rubber adhesive coated on both sides
- 2.5 mil. off white paper liner
- Liner extension: 1/8in. on each side
- Easy liner starting and removal
- Tissue reinforcement
- High initial adhesion
- Extended liner
Adhesive Tape Applications
- Quick and easy tacking of carpet edges
- General industrial mounting, joining and splicing
- Mounting novelties and promotional uses
Adhesive Tape Colors
- Cream
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.