3M
7959MP
Membrane Switch Spacer
A 9.0 mil. switch spacer with #200 hi-performance acrylic adhesive and a polyester film backing used as a spacer for membrane switch/ keyboard circuits. Solvent resistance is excellent when this product is properly applied to impervious materials. #200 adhesive resists softening through edge contact with mild acids, alkalis, oil, gasoline, Kerosene, JP-4 fuel and many other solvents. Total tape immersion in chemicals and solvents is not recommended. The bond strength is dependent upon the amount of adhesive-to-surface contact developed, firm application pressure develops better adhesive contact and therefore improves bond strength. Initial tape application below 50°F is not recommende because adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 9 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 93 oz/in |
| Adhesion (unwind) | 93 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp | 250° F |
Product Features
- 5.0 mil. polyester backing
- 2.0 mil. #200 acrylic adhesive coated on both sides
- Dielectric strength: 1.6 KV/ mil.
- Insulation resistance: 1.1 x 10 ohms
- Volume resistivity: 1.1 x 10 ohms-cm
- Surface resistivity: 1.0 x 10 ohms/ square
- 90° peel adhesion to stainless steel: 70 oz./in.
- 90° peel adhesion to epoxy: 88 oz./in.
- 90° peel adhesion to polyester: 92 oz./in.
- 90° peel adhesion to polycarbonate: 122 oz./in.
- 90° peel adhesion to ABS: 96 oz./in
- Bond strength increases as a function of time and temperature
- Adhesive is resistant to oxidation and ozone when exposed to air or sunlight
- Long term environmentally stable bond
- High cohesive strength withstands repeated stresses from switch activation
- Excellent temperature, humidity and chemical resistance
- High bond strength to high surface energy plastics such as polyester and polycarbonate
Adhesive Tape Applications
- Spacer for membrane switch/ keyboard circuits
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.