3M
9172MP
***Discontinued*** Laminating Adhesive
Discontinued Please see 3M 7952MP or 3M 7962MP as alternatives or 9332FL https://www.budnick.com/Datasheets/3M/7952MP https://www.budnick.com/Datasheets/3M/7962MP
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 111 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp | 300° F |
Product Features
- #200MP hi-performance acrylic adhesive
- 4.0 mil. paper liner and 3.0 mil. polyethylene liner
- Clear, film liner enables inspection of backlit graphics
- 90° peel adhesion to polycarbonate: 48oz./in.
- Accommodates application to smoother surfaces
- Liner strength resists breakage and provides one-piece removal
- High cohesive strength resists edge lifting and slippage
- High humidity has minimal effect on bond strength
- Resistant to UV exposure and immersion in water
- Resistant to heat up to 400°F
Adhesive Tape Applications
- Lamination to backlit polycarbonate or polyester graphic overlay materials used in the automotive and electronics industries
- Bonding metal and plastic nameplates with many die cut openings
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.