3M
92
Polyimide Film Electrical Insulation Tape
3M™ Polyimide Film Electrical Tape 92 is a 1-mil polyimide film backing with silicone adhesive. Its silicone pressure sensitive adhesive allows it to be used at 356ºF (180ºC), and it is UL 510 Flame Retardant. Like most insulated tapes, from 3M, Tape 92 is available in standard and custom widths and lengths. The standard length is 36 yards, and can be cut to widths ranging from 1/4” to 23”. Longer lengths up to several times normal length are possible, dependent upon width.
| Backing/Carrier | Polyimide |
|---|---|
| Adhesive | Silicone |
| Thickness | 3 Mils |
| Tensile | 30.00 lbs/in |
|---|---|
| Elongation | 55.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 25 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 356° F |
Product Features
- Flame retardent
- Silicone pressure sensitive adhesive allows it to be used at 356ºF
- Can be cut to wdiths raning from 1/4'' to 23''
Markets Served
- Electronics
- Industrial
- Appliance
- Automotive
Adhesive Tape Applications
- High temperature applications
- Electrical applications
- Wrapping coils, transformers, capacitors, wire harnesses, and for anchoring leads/terminal boards
- Used in printed circuit board assembly as a wave solder masking tape
Adhesive Tape Colors
- Amber
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.