3M
9373
***Discontinued*** Adhesive Transfer Tape
Discontinued A 3.0 mil. acrylic based adhesive transfer tape specially formulated to provide a permanent bond between substrates requiring regulatory compliance with various flame retardency standards such as Federal Aviation Regulation 25.853, UL 94 V-0/2, NFPA 1971 (2000 Ed.), FMVSS 302 and others. Three adhesive thicknessess are available: 2.0, 3.0 & 5.0 mil.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 175 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp | 180° F |
Product Features
- Areal density = 113 gm/Sq. M.
- Thickness tolerance = +/ - 15%
- 90° peel adhesion to ABS = 77 oz./in.
- 90° peel adhesion to polycarbonate = 77 oz./in.
- 90° peel adhesion to polypropylene = 52 oz./in.
- 90° peel adhesion to polyethylene = 59 oz./in.
- Shear adhesion to stainless steel for 1000 gm at room temp. = 10,000 min.; for 500 gm at 158°F = 10,000 min.
- These attributes and choice of three product thicknessess make the product ideally suited to applications in aerospace, maritime, electronic, automotive and bundling construction applications on both smooth and textured substrates
Adhesive Tape Applications
- Formulated for applications requiring flame retardency and high bond strength to a wide variety of substrates
Adhesive Tape Colors
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.