3M
9671LE
Adhesive Transfer Tape
A 2.0 mil. tape that features hi-strength 300LSE acrylic adhesive primarily used for bonding, graphics and graphic overlays. This tape consists of a polycoated kraft liner for lay flat qualities, moisture stability and excellent processing of plastic graphic overlays. This pressure-sensitive acrylic adhesive is one of nine tapes that belongs to an adhesive family and is available in several thicknesses. The thicknesses offer a wide variety of surface bonding and provides a variety of liner configurations to help ensure process flexibility. 9671LE has excellent adhesion to surface contaminated lightly with oil typically used with machine parts. This tape also offers excellent bond to low surface energy plastics, such as polypropylene and powder coatings.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 75 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp | 200° F |
Product Features
- 2.0 mil. 300LSE acrylic adhesive
- 6.5 mil. paper liner
- 90° peel adhesion to ABS: 79 oz./in.
- 90° peel adhesion to polypropylene: 74 oz./in.
- Bond strength increases as a function of time and temperature
- High humidity has minimal effect on adhesive performance
- Not effected by UV exposure or immersion in water has no effect on bond strength
- Chemical and temperature resistant
Adhesive Tape Applications
- Plastic nameplates or graphic overlays for use on low surface energy plastics
- Waste removed nameplates on a common sheet for ease of application
- Attaching membrane switch assemblies to powder coated surfaces and low surface energy plastics
- Graphic overlays with end tabs for easy liner removal
- Graphic application to surfaces such as wood, fabric and plastic where very high bond strength is required
- Attaching identification material to lightly oily surfaces typical of machine parts
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.