3M
9774WL
Adhesive Transfer Tape
A 4.0 mil. transfer tape consisting of #300MP acrylic adhesive on a polycoated kraft liner primarily used for fabricated parts and low surface energy plastics. #300MP adhesive is very smooth and is suitable for bonding to most surfaces, including low surface energy plastics. 9774 tape will hold securely after exposure to numerous chemicals including oil, mild acids and alkalis. The bond strength of 9774 generally increases after cycling four times through: 4 hours at 158°F; 4 hours at -20°F and 16 hours at 73°F.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 75 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp |
Product Features
- 4.0 mil. #300MP hi-strength acrylic adhesive
- Moisture stable liner
- 90° peel adhesion to polycarbonate: 34oz./in.
- 90° peel adhesion to polypropylene: 40oz./in.
- Bond strength increases as a function of time and temperature
- No effect by UV exposure or immersion in water
- High humidity has minimal effect on adhesive performance
- Resistant to heat up to 250°F
- Good shear holding power at elevated temperatures
Adhesive Tape Applications
- Fabricated foam parts to contoured surfaces
- Plastic nameplates or graphic overlays for use on low surface energy (LSE) plastics
- Multiple die cut parts on a common sheet for ease of application
- Fabricated parts with end tabs for easy liner removal
- Graphic of fabricated parts to surfaces such as wood, fabric, plastic, rubber and textured materials
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.