3M
9882
Thermally Conductive Tape
A 2.0 mil. thermally-conductive acrylic adhesive supported on a protective release liner is ideal for bonding of IC's, packages, components and flex circuits to heat sinks. This tape yields an excellent combination of thermal conductivity, electrical insulation, adhesion (with reworkability) and ease of use in applications that do not require a heat cured adhesive. 9882 tape combines the highest performance acrylic adhesive with highly conductive ceramic particles to provide an extremely reliable and user-friendly thermal interface material. The high performance adhesive is optimized for final adhesion, with bond strength increasing over time and with exposure to elevated temperatures.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 19 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- 2.0 mil. acrylic adhesive
- Pure adhesive film construction
- High temperature adhesion
- High delectric strength
- Conductive ceramic particles
- Immediate tack with light pressure
- Avoids mess, hassle and cost of greases and clips
- Eliminates long cure times and fixturing of liquid adhesives
- Die-cut and pre-applied to one surface for later bonding
- High dielectric strength
- High degree of thickness control
Adhesive Tape Applications
- Mounting flexible heating foils
- Mounting temperature-indicating films
- Mounting thermoelastic cooling modules
- Bonding flex circuit to heat sink
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.