3M
9968
***Discontinued*** Single Coated Splicing Tape
Discontinued A 4.0 mil. single coated tape fearturing 33# bleached kraft paper coated backing with a light green repulpable adhesive used for taping down edges and butt splicing applications. Packaging 9968 tape in sealed bags assures constant moisture content of unused tape. Water solubility and alkali dispersability are excellent and eliminate risk of contaminating the paper mill broke with non-repulable material. The backing of this tape is printable and adhesion to paper increases after a short dwell time.
| Backing/Carrier | Flatback Paper |
|---|---|
| Adhesive | |
| Thickness | 4 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp |
Product Features
- 33# white, flatbacked backing
- Repulpable adhesive
- Tape and liner are completely repulpable
- Excellent affinity to cellulose fibers
- High temperature adhesive
- No need to remove splice from waste
- Prevents contamination of paper mill broke by non-repulpable splice material
- Withstands high oven temps. typically associated with web printing
- Saves labor
- Increases value of scrap paper
- Reduces down time due to splice failure
Adhesive Tape Applications
- Tape down leading or trailing edges of paper on overlap splice
- Butt splice
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.