3M
ISOLOSS™ LS-2506
Polyurethane Foam
3M ISOLOSS™ LS Polyurethane Foams have a low compression set, high durability, and broad operating temperature ranges. These all-purpose foams come in a wide range of densities and thicknesses. A unique combination of design features allow for custom-made solutions for different applications. ISOLOSS™ LS-2506 Density: 25 lb/ft3. Thickness 0.0625" (1/16")
| Backing/Carrier | PU - Polyurethane |
|---|---|
| Adhesive | |
| Thickness | 60 Mils |
| Tensile | 135.00 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | |
| Max Long-Term Temp | 225° F |
Product Features
- Low compression set
- High energy absorption
- Effective vibration isolation
- Low outgassing
- High internal strength
- Chemical resistance
- Flame resistance
- Broad service temperature range
- Listed as Gasket & Seal Material UL File #MH17135
- 3M adhesive compatible
Markets Served
- Aerospace
- Appliance
- Automotive
- Construction
- Electronics
- Marine
- Medical Device
- Truck and trailer body
Adhesive Tape Applications
- Vibration damping and/or shock absorbing pad in electronic devises
- Gasketing
- Gap filling
- Cushioning and support
- Energy control
- Light duty sealing
- Padding
- Equipment & component mounts
- Buzz, squeak and rattle (BSR)
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.