Adchem Corp. / Berry Plastics
4351M
Film Supported Tape
4351M is a 3.6 mil, polyester film which bonds a variety of ether, ester and low perm urethane foams. The liner side adhesive is also designed to adhere to low energy surfaces including talc-filled polypropylene.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2.6 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 144 oz/in |
| Adhesion (unwind) | 53 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Adhesive is different on each side of carrier
- High tack
- Heat resistant rubber & acrylic
- Low fogging
Adhesive Tape Applications
- Excellent adhesion to a broad spectrum of foam substrates
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.