Adchem Corp. / Berry Plastics
7511
Adhesive Transfer Tape
7511 is a 5 mil, adhesive transfer tape used for bonding metal and plastic nameplates as well as for dissimilar materials where long aging, UV and environmental resistance is needed. Excellent product for bonding rough, irregular or cellular products, i.e. foams, fabrics, embossed metals, and plastics. Ultimate adhesion to most surfaces is excellent. Recommended for use on enamel, metal, glass, wood and a variety of plastics. The use of heat and pressure will help increase the initial bond of 7511 to the substrate.
Backing/Carrier | |
---|---|
Adhesive | Acrylic |
Thickness | 5 Mils |
Tensile | |
---|---|
Elongation | |
Adhesive Activation | Pressure |
Adhesion (unwind) | 80 oz/in |
Min. Application Temp | 40° F |
---|---|
Min. Service Temp | 20° F |
Max Short-Term Temp | 180° F |
Max Long-Term Temp |
Product Features
- Shear adhesion is 7 days when 15mins residency with 500gm/sq.in (PSTC #7)
- Excellent Shear
- Die cuts cleanly
- Bonds well to most foam products
- Good service temperature
Adhesive Tape Applications
- Bonds to:
- Enamel
- Metal
- Glass
- Wood
- A variety of plastics
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.