Adhesive Applications
1308-1
Single Coated Black Polyethylene Foam
1308-1 is a 1/8in single coated 2# density, black, polyethylene foam. It uses a synthetic rubber based adhesive, which provides superior performance in applications requiring an aggressive, high tack, high shear pressure sensitive tape.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 125 Mils |
| Tensile | 20.00 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 95 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 150° F |
| Max Long-Term Temp |
Product Features
- Standard liner is 60# white silicone-coated paper
- Also available with brown poly-coated paper liner as 1308-N
- Also available with a blue polyethylene release liner as 2008-B
- Also available with a white polyethylene release liner as 2008
- Also available with a blue EZ-Release polyethylene release liner as 2008-BEZ
- Static Shear - minimum requirement 3psi for 100+ hours
- Probe tack average 800
- 2# density polyethylene foam
- Available in white foam as product #1008-1
- Aggressive, high tack adhesive
- Bonds to many different substrates
Adhesive Tape Applications
- Point of purchase displays and die cuts
- Appliances
- Wire raceways
- Wire mounts
- Shower & tub enclosures
- Computers
- Signage
- Metal Stampings
- Plastic Extrusions
- Furniture
- Window glazing
- Mirrors
- Window Trim
- Motor home & yachts
- Molded plastic
Adhesive Tape Colors
- Black
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.