Avery Dennison
1905 PET
5 mil High Performance Acrylic Laminating Adhes.
HPA 1905 PET is a 5 mil transfer adhesive designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Product has good holding power under high stress and load. Specification # 57413
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 102 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 450° F |
| Max Long-Term Temp | 400° F |
Product Features
- Unsupported
- Specially formulated acrylic adhesive
- Good adhesion to high surface energy plastics and metals due to thick adhesive mass
- Ease of die-cutting and liner removal
- Poleyster liner provides layflat for easy processing
- Static Shear: 2.2 lbs. at 72° upon 1.0" squared area>10,000 minutes to failure 400°Static Shear: 2.2 lbs. at 72° upon 1.0" squared area>5,000 minutes to failure
- Excellent balance of properties to perform in demanding applications
- Excellent high temperature adhesion
- Chemical, solvent, heat, humidity and UV resistant
- Thick adhesive mass allows for improved bonding and gap filling
Adhesive Tape Applications
- Nameplates
- Membrane touch assemblies
- Graphic overlays
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.