Avery Dennison
1966

Transfer Tape

DISCONTINUED 1966 is a 3.6 mil rubber based adhesive transfer tape. This product is ideal for bonding to rubbers and sponge rubber where moderate temperature resistance is required. Specification #57423

Backing/Carrier
Adhesive Rubber
Thickness 3.6 Mils
Tensile
Elongation
Adhesive Activation
Adhesion (unwind) 250 oz/in
Min. Application Temp 50° F
Min. Service Temp
Max Short-Term Temp 200° F
Max Long-Term Temp 175° F

Product Features

  • High tack rubber adhesive
  • Moderate heat resistance
  • Densified kraft release liner
  • Good adhesion to rubber and sponge rubber
  • Excellent bond to almost any substrate

Adhesive Tape Applications

  • Permanent bond to many sponge and dense rubbers
  • Temporary bond to heavily plasticized or oiled rubbers

Converting Services

Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management

At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.