Avery Dennison
702P
Double Coated Clear Polyester
702P is a 5 mil double coated with a .5 mil polyester carrier that is primarily used for bonding where plasticizer and temperature resistance is needed. It has a heavy mass of adhesive on the liner side and is designed for bonding to a wide variety of plastic, metal and foam substrates. Specification # 55810.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 74 oz/in |
| Adhesion (unwind) | 61 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 275° F |
| Max Long-Term Temp | 225° F |
Product Features
- Specially formulated adhesive
- Polyester carrier
- Moisture stable release liner
- Heavy mass of adhesive-liner side
- Loop tack to stainless = 40 oz/in on the unwind side & 65 oz/in on the liner side
- Static shear: 5.5 lbs at 72° upon a 1" area > 3000 minutes to failure
- Stability in processing & die cutting
- Temperature resistant
- Solvent resistant
- Plasticizer resistant
Adhesive Tape Applications
- Automotive interior trim
- Any metal to plasic bonding
- Foam bonding
- ABS plastic
- Aluminum-anodized
- Foam-polyester urethane
- Foam-polyether urethane
- Ceramic
- Metal
- Polycarbonate (lexan®)
- PVC-mildly plasticized
- Stainless
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.