Avery Dennison
8217
Double Coated Non-Woven
FT 8217 is a 7.2 mil, double coated non-woven. It is primarily used in applications that require excellent adhesion to foam or low surface energy substrates along with good dimensional stability. . Specification #56128
| Backing/Carrier | Non-Woven |
|---|---|
| Adhesive | Acrylic |
| Thickness | 7.2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 133 oz/in |
| Adhesion (unwind) | 106 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp | 200° F |
Product Features
- Specially formulated high tack acrylic adhesive
- Conformable non-woven carrier
- Densified kraft release liner
- Static Shear: Unwind Side=2.2 lbs. at 72°F upon a 1" square area >3,000 minutes to failure
- Liner Side=2.2 lbs. at 72°F upon a 1" square area >750 minutes to failure
- Excellent foam bonding characteristics
- Excellent conformability
- Heavy adhesive mass
- Excellent adhesion to a variety of substrates like foam and low surface energy
Adhesive Tape Applications
- Designed for use in applications that require excellent adhesion to foam or low surface energy substrates along with good dimensional stability
- ABS plastic
- Aluminum-anodized
- Cloth
- EPDM
- Fiberglass-molded
- Film-polyetheylene (treated)
- Film-polypropylene (treated)
- Foam-polyester urethane
- Foam-polyethylene
- Ceramic
- Metal
- Neoprene
- Polycarbonate (Lexan®)
- Powder coated paints
- Rubber-extruded
- Stainless
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.