Avery Dennison
8270
Double Coated Acrylic
FT 8270 is a 7.0 mil double coated tissue with a high performance low VOC modified acrylic adhesive. It bonds very well to low surface energy materials and features good foam bonding properties and high heat resistance. FT 8270 is commonly used in automotive applications and where low VOC properties are required.
| Backing/Carrier | Tissue |
|---|---|
| Adhesive | Acrylic |
| Thickness | 7 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 64 oz/in |
| Adhesion (unwind) | 80 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp |
Product Features
- Double coated tape construction
- Low outgassing high performance modified acrylic adhesive
- Tissue carrier
- Poly coated kraft release liner
- Dimensional stability and good die cutting characteristics
- Solvent free adhesive with good foam bonding performance
- Good heat resistance
- Flexibility and conformability along with the ability to tear by hand
- Good moisture stability and lay flat properties
- Adhesion to ABS - 180° Peel - 112 oz/in (liner & unwind)
- Static shear is >10,000 minutes to fail when 2.2# is put on a 1" square area
Markets Served
- Automotive
- Appliance
- Truck and trailer body
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.