Avery Dennison
8337
Differential Double Coated Polyester
FasTape 8337™ is a 3.2 mil, differentially double coated, polyester tape. It is primarily used for permanently mounting to foam while offering removability on the other side.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 3.2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 43 oz/in |
| Adhesion (unwind) | 113 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 150° F |
| Max Long-Term Temp | 120° F |
Product Features
- Hi-tack/Low tack adhesive system
- Unwind adhesive is permanent
- Liner side adhesive is removable
- Static Shear: Liner side=5.5 lbs. at 72° upon a 1"x1" square area>1500+ minutes to failure
- Unwind side=5.5 lbs. at 72° upon a 1"x1" square area>250+ minutes to failure
- Excellent slitting and die-cutting
- Permanent adhesive is excellent for most foam bonding applications
- Liner side adhesive offers clean removability from most surfaces (after short periods of time)
Adhesive Tape Applications
- Suitable for:
- ABS plastic
- Anodized aluminum
- Corrugated Box
- Molded Fiberglass
- Treated polyethylene film
- Treated polypropylene film
- Polyester urethane foam
- Polyether urethane foam
- Polyethylene foam
- Glass/ceramic
- Painted metal
- Powder coated metal
- Polycarbonate (lexan®)
- Molded polyehtylene
- Stainless steel
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.