Avery Dennison
8409
***Discontinued*** Double Coated Polypropylene
DISCONTINUED BY AVERY DENNISON FT 8409 is a 9.0 mil, double coated polypropylene. It is primarily used for interior applications (out of direct sunlight) which require high adhesion to difficult substrates (e.g. polypropylene). Specification #56156
| Backing/Carrier | PP - Polypropylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 9 Mils |
| Tensile | |
|---|---|
| Elongation | 90.00% |
| Adhesion (liner) | 270 oz/in |
| Adhesion (unwind) | 270 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 200° F |
| Max Long-Term Temp | 175° F |
Product Features
- Specially formulated high tack rubber based adhesive
- Polypropylene Carrrier coated on both sides
- Semi-bleached kraft release liner
- Static Shear: 10 lbs. at 72° upon a 1" square area>5,000 plus minutes to failure
- 180° peel on polypropylene & ABS= 136 oz/in
- Tensile MD 224oz Force
- Specially designed adhesive
- Heavy weight release liner
- Excellent adhesion to low surface energy substrates
- Ease in die-cutting and liner removal
- Excellent lamination consistency
Adhesive Tape Applications
- Is used for interior applications (out of direct sunlight) which require high adhesion to difficult substrates (e.g. polypropylene)
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.