Avery Dennison
FL 1007
Single Coated Foil Tape
FL 1007 is a 3.0 mil single coated foil with high performance acrylic adhesive. It bonds well to medium, and high surface energy plastics and metals. FL 1007 is suitable for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials.
| Backing/Carrier | Metal Foil |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) | 64 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 400° F |
| Max Long-Term Temp |
Product Features
- Single coated construction
- Dead soft aluminum foil facestock
- Multipurpose HPA™ high performance acrylic adhesive
- Strong densified kraft liner
- Conformable foil bonds to flat or contoured surfaces
- Strong bond to a variety of medium and high surface energy materials
- Excellent resistance to solvents and heat
- High holding power to high and medium surface energy materials
- Static shear is >10,000 minutes to fail when 2.2# is put on a 1" square area
- Loop tack 180° 20 in/min is 96 oz/in
Markets Served
- Automotive
- Construction
- Electronics
- Appliance
- Truck and trailer body
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.