Avery Dennison
FT1126
High Tack Acrylic Transfer
FT 1126 is a 5.0 mil, high tack, acrylic transfer. It is primarily used for applications requiring lamination to polyether and polyester urethane foams. The heavy mass of adhesive provides excellent inital tack and adhesion and should be considered for application involving a textured substrate. Specification #56091
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 125 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 350° F |
| Max Long-Term Temp | 225° F |
Product Features
- High tack acrylic adhesive
- Heavy adhesive mass
- Densified kraft release liner for superior die cutting properties
- Static Shear: 5.5 lbs. at 72° upon a 1" squared area>400 minutes to failure
- Excellent initial tack and adhesion
- Adheres to a wide variety of substrates
- Excellent foam bonding characteristics
Adhesive Tape Applications
- Lamination to polyether and polyester urethane foams
- Textured substrates
- ABS plastic
- Aluminum-anodized
- Cloth
- EPDM
- Fiberglass-molded
- Film-polyethylene (treated)
- Film-polypropylene (treated)
- Foam-ethafoam
- Foam-polyester urethane
- Foam-polyether urethane
- Foam-polyethylene
- Foam polystyrene
- Ceramic
- Metal
- Neoprene
- Polycarbonate (lexan®)
- Rubber-extruded
- Stainless
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.