Avery Dennison
MS1155 WSF
***Discontinued*** Adhesive Transfer Tape
DISCONTINUED USE 1158, 1126 MS1155 WSF is a 5mil acrylic used to bond low surface energy substrates such as graphics and foam. Specially designed graphics and foam bonding uses under moderate/high temperature conditions.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 300° F |
| Max Long-Term Temp | 200° F |
Product Features
- Adhesive properties (180° Peel Adhesion) HDPE: 79 oz Force/inch; Polypropylene: 135 oz Force/inch; Oily Panel: 130 oz Force/inch; Powder Coated Panel: 127 oz Force/inch
- Excellent adhesion to LSE substrates, lightly oiled and powder coated panels
- Good adhesion to foams and most other substrates
- Chemical, humidity and UV resistance
- Stable performance over time
- Ease of die-cutting and liner removal
- Moisture stable liner provides layflat for easy processing
- Very high initial tack
Adhesive Tape Applications
- Specially designed graphics and foam bonding uses under moderate/high temperature conditions
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.