Banner Ups® by Budnick
TigerMount™ 060
White PE Foam Double Coated Rubber
Banner Ups by Budnick TigerMount 060 is a 4#, 1/16" thick, white polyethylene foam double coated with a rubber adhesive It uses a synthetic rubber based adhesive, which provides superior performance in applications requiring an aggressive high tack/high shear pressure sensitive foam tape. It is used for indoor applications like construction of P.O.S. displays, mounting of signs and posters, mounting of shelf edge labeling systems, and damping and fixation of components and panels. Due to the high foam conformability, it has an immediate bond, even on rough surfaces.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 62 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) | 135 oz/in |
| Min. Application Temp | 65° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | 150° F |
| Max Long-Term Temp |
Product Features
- Standard liner is 60# white silicone-coated paper
- Static Shear - minimum requirement 7psi for 100+ hours
- Probe tack average 975
- 4# density polyethylene foam
- Aggressive, high tack adhesive
- Bonds to many different substrates
Markets Served
- Extruders of Plastic and Rubber
- Signage, Banners, & Printing
- Automotive
- Appliance
- Commercial
- Industrial
- Construction
- Commercial printing
Adhesive Tape Applications
- Point of purchase displays and die cuts
- Lighter duty indoor mounting
- Gap filling & mounting
- Bonding to textured surfaces
- Channel or profile mounting
Adhesive Tape Colors
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.