Berry Plastics
172R
Patco High Temperature, Fine Line Masking Tape
172R is a 6.2 mil, tough, P.V.C. film substrate coated with a high temperature rubber based PSA for masking.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Rubber |
| Thickness | 6.3 Mils |
| Tensile | 20.00 lbs/in |
|---|---|
| Elongation | 185.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 19 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 280° F |
| Max Long-Term Temp |
Product Features
- Available on a 68# release liner as Patco 172-68
- Good solvent resistance
- Waterproof
- Conformable fineline edge
- High temperature performance
- Stain & ghost resistant
- Clean cutting plastic
- Recyclable
- Holds up to OEM and autobody paints
- Excellent demask
- Provides superior breaklines
- Working in most OEM bake cycles
- Clean removal from most surfaces
Adhesive Tape Applications
- Mask color separations on plastic (TPO & RIM) fascia, trim and finished metals in high temperature OEM paintline & powerwash operations
- Autobody aftemarket fineline color separation
- Short term outdoor masking (72 hours)
Adhesive Tape Colors
- Blue
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.