Berry Plastics
297
Single Coated Fiberglass Cloth
297 is an 8 mil fiberglass cloth tape used to seal seams, cover pins/rivets where high adhesion and flame resistance is critical, and is also used to repair cargo compartment liners.
| Backing/Carrier | Fiberglass |
|---|---|
| Adhesive | Rubber |
| Thickness | 8 Mils |
| Tensile | 150.00 lbs/in |
|---|---|
| Elongation | 7.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 250° F |
| Max Long-Term Temp |
Product Features
- Adhesion to backing/carrier=62 oz./in. (PSTC-1)
- Weight=8.1 oz./sq.yd. (ASTM D-1000)
- F.A.R. 25.853 (a) 60 Sec. Vertical Burn Exiting Time=0 sec., Burn Length= 0.25 in., Drip Exiting= No Drip
- F.A.R. 25.855 (d) 30 Sec. At 45° Angle Exiting Time=0 sec., Burn Length= None, Drip Exiting= 0 sec
- Ease of installation
- Accommodates angles and turns
- Glass cloth design resists flame penetration for safety
- High conformability
- High tensile strength
- Aggressive adhesive system
- Creep resistance maintains seal under load
Adhesive Tape Applications
- Cargo pit applications
- Seam sealing (taping) and repair of cargo compartment liners for use on covering pins/rivets where high adhesion and flame resistance is critical
Adhesive Tape Colors
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.