Budnick Converting
BT99606
PVC Foam
BT99606 is a low density, industrial PVC foam product formulated to conform to UL HF-1/HBF and is a recognized component of Underwriters Laboratories®. It is used for applications requiring UL 94 HF-1/HBF conformance but does not automatically transfer UL ratings to the customer's product. Contact Budnick for available thicknesses.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness |
| Tensile | 20.00 lbs/in |
|---|---|
| Elongation | 101.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 12 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | -4° F |
| Max Short-Term Temp | 172° F |
| Max Long-Term Temp |
Product Features
- Shelf life = 6 months with adhesive and 2 years without adhesive
- Thickness varies--contact Budnick
- Back Stripping-- Also known as reverse wrapping is when the foam product is manufactured with the adhesive side exposed. The length is determined with the foam used in this manner. When the use requires the adhesive side to be against the paper, the product has to be reverse wrapped so the uncoated foam is exposed. This causes a loss of yield in length. The reason for this loss is that the configuration of the foam is changed because the foam is compressed onto a shorter length of liner. The loss will be equal to the outer circumference of the material minus 10 inches.
- Remains pliable from -20°C to 78°C (-4°F to 172°F)
- UL HF-1/HBF conformance
Adhesive Tape Applications
- Used in applications requiring UL 94 HF-1/HBF conformance
- Seals out dust, dirt, moisture and air
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.