Budnick Converting
BudShield™
12 mil PET Film
BudShield™ is a 12 mil PET film often used for face shields, food and medical trays, and consumer packaging: clamshell, blister and tray. BudShield™ has exceptional properties such as visual transparency, high heat distortion and it has good resistance to mineral oils, solvents and acids.
Warning: The use of BudShield™ in a medical or healthcare-related act or setting is solely at the user's own risk. BudShield has not been tested or approved by the US FDA, CDC, National Institute for Occupational Safety and Health, or any other regulatory agency.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | |
| Thickness | 12 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Easily recyclable
- Visual transparency
- High heat distortion
- Available in clear, black or a variety of colors
Markets Served
- Medical Device
Adhesive Tape Applications
- Face shields
- consumer packaging: clamshell, blister and tray
- Food and medical trays
Adhesive Tape Colors
- Black
- Clear
- Transparent
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.