DeWal Industries / Rogers Corp.
244-2HD
Bondable PTFE Film Tape
244-2HD is a 3.5 mil, skived and tensilized PTFE film that is coated with a " high temperature" silicone adhesive. The tensilized film provides higher tensile strength, lower elongation and higher dielectric strength than a regular skived film. 244-2 has been etched on the top surface so its now bondable to itself or other materials (ex. adhesives).
These tapes are used primarily in electrical applications such as coil wraps and separators, transformers, slot liner and harness wrapping where good insulation and heat resistance are needed.
| Backing/Carrier | PTFE - Skived |
|---|---|
| Adhesive | Silicone |
| Thickness | 3.5 Mils |
| Tensile | 30.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 30 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 500° F |
| Max Long-Term Temp |
Product Features
- U.L. Approval File no. E179854 Approved - Flame Retardant/Cold resistant Govt. Specification Mil-I 23594C,Type2 Pass
- High temperature silicone adhesive
- Higher tensile strength, lower elongation and higher dielectric strength than a regular skived film
- Etched on the top surface to be bondable to itself or other materials
Adhesive Tape Applications
- Used primarily in electrical applications such as coil wraps and separators, transformers, slot liner and harness wrapping where good insulation and heat resistance are needed
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.