DeWal Industries / Rogers Corp.
815-2
VICTREXr PEEKT Film
815-2 is a 4 mil, extruded, virgin PEEK (polyethereketone) film has been surface modified on one side and coated with a silicone adhesive system. The silicone adhesive is resistant to harsh chemical environments while retaining good peel strength with clean removal. The PEEK film offers an excellent combination of friction and wear properties with high heat resistance and good electrical insulation. Typical applications for the this tape include sliding bearing, abrasion resistant wire wraps and oil field equipment requiring abrasion resistance and electrical insulation.
| Backing/Carrier | |
|---|---|
| Adhesive | Silicone |
| Thickness | 4 Mils |
| Tensile | 36.00 lbs/in |
|---|---|
| Elongation | 165.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 30 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 450° F |
| Max Long-Term Temp |
Product Features
- Extruded, virgin PEEK (polyethereketone) film
- Resistant to harsh chemical environments
- Good peel strength
- Clean removal
- Excellent combination of friction and wear properties
- High heat resistance
- Good electrical insulation
Adhesive Tape Applications
- Sliding bearing, abrasion resistant wire wraps and oil field equipment requiring abrasion resistance and electrical insulation
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.