Gaska Tape
V710.375
Low Density PVC Foam Tape
V710.375 is a 3/8" thick, light density, closed cell, PVC foam. This economical general purpose foam tape is ideal on applications requiring positive seals on irregular surfaces or when flex and conformability to seal tight radius curves are critical. Long life seals against air, moisture, light and dust penetration are accomplished when compressed 30% or more. Inherently resistant to fire, ultraviolet rays, most chemicals, acids and solvents.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness | 375 Mils |
| Tensile | 25.00 lbs/in |
|---|---|
| Elongation | 150.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -40° F |
| Max Short-Term Temp | 180° F |
| Max Long-Term Temp |
Product Features
- Thermal Conductivity = 0.039 w/mk
- Density = 7#/cu.ft.
- Fire resistant meets FMVSS 302A
- V715 is cast-on a 1.5mil polyester film to provide dimensional stability and is a self wound product
- Excellent fungi, oxidation & weather resistance
Adhesive Tape Applications
- Curtainwall
- Precast concrete wall
- Refrigeration
- Telecommunications
- Pneumatic system seals
- Retail weatherstrip
- Bus & off-road vehicles
- Air conditioning
- Environmentally controlled rooms
- Squeak and rattle prevention
Adhesive Tape Colors
- Black
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.