John Deal Coatings Inc.
F5275-PC
Unsupported Laminating Adhesive
F5275-PC is a 5.0 Mil high performance laminating adhesive designed for broad use on textured and uneven surfaces including nameplate and membrane switch applications. It is coated with a heavy mass of our MP75 clear acrylic adhesive, which exhibits an excellent balance of peel adhesion, tack and shear strength with good resistant to heat, humidity, UV light and most plasticizers. To assist in consistent laminating and die-cutting, the F5275-PC is coated on a 61LB moisture stable poly-coated Kraft release liner. F5275 is an alternative to 3M 468MP
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | |
| Adhesion (unwind) |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Alternative to #m 4768 MP
- Good resistance to heat, hummidity, UV light and most plasticizers
- Excellent balance of peel adhesion, tack, and shear strength
Markets Served
- Appliance
- Aerospace
- Electronics
- Industrial
Adhesive Tape Applications
- Nameplate and membrane switch applications
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.