John Deal Coatings Inc.
F9200-STD
Unsupported Rubber Laminating Adhesive
F9200-STD is a high performance, unsupported rubber based adhesive designed for difficult assembly aid wrap applications on low surface energy plastics where parts will be subjected to high temperatures during transportation. F9200-STD uses RP100 adhesive and will bond well to a wide variety of non-plasticized materials and should not be used in applications where direct exposure to UV light is required. It has been tested and meets various automotive specifications.
| Backing/Carrier | |
|---|---|
| Adhesive | Rubber |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 170 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -35° F |
| Max Short-Term Temp | 225° F |
| Max Long-Term Temp | 180° F |
Product Features
- High performance adhesive
- Bonds well to a wide variety of materials
- Has been tested and meets various automotive specifications
Markets Served
- Automotive
- Aerospace
- Marine
- Recreational
- Industrial
Adhesive Tape Applications
- Designed for difficult assembly aid wrap applications
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.