MACtac Inc.
IF3030
***Discontinued*** Acrylic Adhesive Transfer
Discontinued MACfilm IF3030 is a 2 mil thick free-film of acrylic pressure-sensitive adhesive. IF3030 represents an economical solution to many general-purpose bonding applications where a non-reinforced film of acrylic adhesive is required. The 2 mil adhesive helps maintain a low-profile appearance on bonded assemblies and provides good adhesion to a variety of substrates. The adhesive is protected by a two-side, release-treated, 2 mil clear polyester film release liner.
| Backing/Carrier | |
|---|---|
| Adhesive | Acrylic |
| Thickness | 2 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 56 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | -20° F |
| Max Short-Term Temp | 170° F |
| Max Long-Term Temp |
Product Features
- Quick Tack is 2.0#/sq.in
- Shear strength is 30+ hours to failure (1000g/sq.in. @72°:F)
- Economical
- Resistant to water, detergent, aliphatic and aromatic hydrocarbons
Adhesive Tape Applications
- Solution to many general-purpose bonding applications
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.