MACtac Inc.
IM1940
MACmountr Double Coated Polyethylene Foam
IM1940 is an 1/8" white closed cell polyethylene foam coated on both sides with an aggressive, general purpose, rubber based adhesive. The product is supplied self-wound on a densified, semi-bleached kraft release liner. IM1940 was developed for general purpose bonding applications and the adhesive bonds to most surfaces including low energy materials such as polyethylene and polypropylene. The 1/8" foam carrier provides a gap filling function that aids in the joining of uneven or irregular surfaces.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Rubber |
| Thickness | 133 Mils |
| Tensile | 15.00 lbs/in |
|---|---|
| Elongation | 450.00% |
| Adhesion (liner) | |
| Adhesion (unwind) |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 150° F |
| Max Long-Term Temp |
Product Features
- Color = White
- Self wound
- Bonds well to most surfaces including low energy materials such as polyethylene and polypropylene
Adhesive Tape Applications
- Foam provides a gap filling function that aids in joining of uneven or irregular surfaces
- General purpose bonding
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.