Main Tape
03000-065B
Black & White Polyethylene Masking Tape
03000-065B is a 4 mil, polyethylene film tape, coextruded, with white one the linerside and black on the unwind side. It is used for surface protection.
| Backing/Carrier | PP - Polypropylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 4 Mils |
| Tensile | |
|---|---|
| Elongation | 360.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 4.5 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Available Widths:
- 30", 36", 42", 48", & 60"
- Custom widths to 96" and lengths to 6000'
- Films are printable, allowing for corporate logos, user instructions and inventory control
- Adhesion to steel=4.5-9.2oz./in.
- Unwind Adhesion=.5-1.0oz./in. (ASTM D3330/B)
- Tensile Strength: MD=3800PSI, TD=2500PSI(ASTM D882)
- Elongation: MD=360%, TD=540%
- Low density
- Two layer black & white coextruded polyethylene
- Clear film permits surface inspection without removal
- Can be hand or machine applied
- Acrylic adhesives will adhere to a variety of substrates and remove cleanly
- Prevents scratching & marring
- Prevents extra clean up due to over-spray
- Reduces the need for costly rework & eliminates rejects
- Medium density film cuts cleanly & resists edge curl
Adhesive Tape Applications
- Ideal on painted metal: Matt, textured & embossed
- Protects Dry polished stainless steel
- Cultured marble protection such as sinks, & spas
- Nameplate protection
Adhesive Tape Colors
- Black
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.