Main Tape
03000-068B
Black & White Polyethylene Surface Protection
03000-068B is a 3 mil, black on the inside, white on the outside, polyethylene film used for surface protection.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3 Mils |
| Tensile | |
|---|---|
| Elongation | 550.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 4 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Available Widths:
- 30", 36", 42", 48", & 60"
- Custom widths to 96" and lengths to 6000'
- Films are printable, allowing for corporate logos, user instructions and inventory control
- Adhesion to steel=4-7.0oz./in.
- Unwind Adhesion=.5-1.0oz./in. (ASTM D3330/B)
- Tensile Strength: MD=3800PSI, TD=2500PSI(ASTM D882)
- Elongation: MD=550%, TD=675%
- Low density
- Can be hand or machine applied
- Acrylic adhesives will adhere to a variety of substrates and remove cleanly
- Prevents scratching & marring
- Prevents extra clean up due to over-spray
- Reduces the need for costly rework & eliminating rejects
- Medium density film cuts cleanly & resists edge curl
Adhesive Tape Applications
- Ideal protection on polished aluminum
- Stainless steel polished dry and wet
Adhesive Tape Colors
- White
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.