Main Tape
03M00-048C
Clear Polyethylene Surface Protection
03M00-048C is a 3 mil polyethylene film used in interior applications of surface protection of stainless steel. A medium tack good performance masking tape consists of a low density film coated with a chemically stable water based acrylic adhesive.
| Backing/Carrier | PE - Polyethylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3 Mils |
| Tensile | |
|---|---|
| Elongation | 600.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 2 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Available Widths:
- 30", 36", 42", 48" & 60"
- Custom widths to 96" and lengths to 6000ft
- Films are printable, allowing for corporate logos, user instructions and inventory control
- Adhesion to steel=2.0-7.0 oz./in.
- Unwind Adsesion=.3-.6 oz./in.
- Tesile Strength: MD=4100PSI, TD=3300PSI
- Elongation: MD=600%, TD=650%
- Low density
- Can be hand or machine applied
- Acrylic adhesive will adhere to a variety of substrates and remove cleanly
- Prevents scratching & marring
- Prevents extra clean up due to overspray
- Reduces the need for costly rework & eliminates rejects
- Medium density film cuts cleanly & resists edge curl
Adhesive Tape Applications
- Ideal for stainless steel with a medium surface finish such as #4, 7, & 8 sheets or coils
- Use in processing, brake forming, punching, drawing, drilling, plasma cutting, shipping & handling
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.