Novagard / Foam Seal
70P UL
Low Density PVC Foam Tape
Foam Seal 70P UL is a low density industrial Polyvinyl Chloride (PVC) foam tape formulated to conform to UL HF-1/HBF* and is a recognized component of Underwriters Laboratories. It has an acrylic adhesive and is used for general air, dust, and moisture seal gasketing and sound damping. UL File # E 112126 (QMFZ2) BACK STRIPPING Also known as reverse wrapping. Foam Seal/Novagard manufactures the foam with the adhesive side exposed. The length is determined with the foam used in this manner. When the user requires the adhesive side to be against the paper, the product has to be reverse wrapped so the uncoated foam is exposed. This causes a loss of yield in length. The reason for this loss is that the configuration of the foam is changed because the foam is compressed onto a shorter length of liner. The loss will be equal to the outer circumference of the material minus 10 inches.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Acrylic |
| Thickness |
| Tensile | 20.00 lbs/in |
|---|---|
| Elongation | 150.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 20 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Moisture seal
- Air & dust seal
- Low Density PVC foam
- Excellent adhesion to a variety of surfaces
- UL HF-1/HBF compliant
- Dark charcoal gray color
- Available 1/16 to 1/2" thick
- 6.2 to 10#/cu. ft density
- Adhesion to steel min. 20, typical 30 oz/in.
- Force to compress 25% 1.5 psi
- Compression deflection .5 psi
- Hardmess Shore 00 26
Markets Served
- Aerospace
- Automotive
- Appliance
- Industrial
- Construction
- Industrial
Adhesive Tape Applications
- 70P UL is used for applications requiring (UL 94 HF-1/HBF) conformance but does not automatically transfer UL ratings to the customer’s product.
- Air, dust, & moisture seal between components
- Sound damping
- Gasketing
- Appliance gasketing
- Construction gasketing
Adhesive Tape Colors
- Gray
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.