Permacel/Nitto Denko America
J-LAR II
***Discontinued*** Polypropylene Heavy-Gauge
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. J-LAR IIr is a 3.5 mil optically clear, heavy-duty polypropylene film. It is used for label protection and protective covering where rough treatment is normally encountered. J-LAR II® can be used in contact with grease, alkalis, oils, acids and many solvents.
| Backing/Carrier | BOPP - Biaxially Oriented Polypropylene |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.5 Mils |
| Tensile | 45.00 lbs/in |
|---|---|
| Elongation | 140.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 48 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Optically clear
- Heavy-duty
- Extra thick
- Adds stiffness to labels for easy application
- Extremely durable
- Superior abrasion resistance
- Low moisture vapor transmission (MVT)
- Can be used in contact with grease, alkalis, oils, acids and many solvents
Adhesive Tape Applications
- Laminating
- Heavy-duty label protection
- Display board edging
- Overlay material
Adhesive Tape Colors
- Clear
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.