Permacel/Nitto Denko America
P11
Aluminum Foil Tape
This is a dead soft aluminum foil tape with solvent resistant acrylic adhesive. It is engineered to handle a wide range of industrial and aerospace applications. P11 is a very effective masking tape in the chemical paint stripping process. It is also used for waterproof sealing, sound/vibration damping and heat shielding.
Backing/Carrier | Aluminum |
---|---|
Adhesive | Acrylic |
Thickness | 5 Mils |
Tensile | 29.00 lbs/in |
---|---|
Elongation | 5.50% |
Adhesive Activation | Pressure |
Adhesion (unwind) | 60 oz/in |
Min. Application Temp | 40° F |
---|---|
Min. Service Temp | 0° F |
Max Short-Term Temp | |
Max Long-Term Temp |
Product Features
- Aggressive adhesive adheres tightly when smoothed down on work surfaces
- Clean removal, no residue
- Highly conformable
- Can be die-cut into pre-determined sizes
- Vapor-tight seal effectively combats moisture, contamination and corrosion
- Excellent aging properties
Markets Served
- Electronics
- Automotive
- Construction
- Industrial
Adhesive Tape Applications
- Waterproof sealing
- Edge sealing
- Heat Shielding
- Window mask
- Protective covering of critical parts against stripping compounds
- Backup welding
- Gutter repair
Adhesive Tape Colors
- Silver
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.