Permacel/Nitto Denko America
P21SP
***Discontinued*** Electrical Insulating Tape
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute.
P21SP is a new "softer cloth" version of P21 for better conformability. A 7 mil glass cloth for insulating and holding applications involving heavy gauge wire and/or high temperatures. Engineered for a wide range of general industry electrical maintenance applications Also used for splicing and harness wrapping and for protective wrapping of cables and wires.
Proerly cured, this product becomes more firmly bonded to the surface to which it is applied. It retains sufficient suppleness to withstand flexing without cracking-becomes firm, but not brittle.
| Backing/Carrier | Fiberglass |
|---|---|
| Adhesive | Rubber |
| Thickness | 7 Mils |
| Tensile | 190.00 lbs/in |
|---|---|
| Elongation | |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Extremely conformable
- Features true "2 to 1" characteristics: In uncured state, it has excellent pressure sensitive properties
- Can be subjected to cure through heat, which firms the adhesive and gives the tape solvent resistance
- Electrical adhesive is non-corrosive against copper and contains no sulfur or other injurious agents
- Offers outstanding abrasion resistance
- Supplied in slit sizes witha pinked edge to eliminate fraying
Adhesive Tape Applications
- Engineered for a wide range of general industry electrical maintenance applications
- Used for splicing, harness wrapping & for protective wrapping of cables and wires
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.