Permacel/Nitto Denko America
P222
2-Mil Polyimide Film Tape
P222 is a 3.75 mil, polyimide, film tape. It is engineered for heavy-duty, high temperature applications where 1-mil polyimide doesn't provide adequate strength of physical protection. P222 is a versatile tape and is used as the primary insulation in high-performance, flexible wiring boards and heater blanket assemblies. When interlined with special treated cloth interliner, P222 can be die-cut into formable insulators.
| Backing/Carrier | Polyimide |
|---|---|
| Adhesive | Silicone |
| Thickness | 3.75 Mils |
| Tensile | 55.00 lbs/in |
|---|---|
| Elongation | 65.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 20 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- High dielectric strength for critical insulating requirements
- Inherently flame retardant
- Ultimate in tensile, tear, puncture & abrasion resistance when used with medium & heavy gauge magnet wire
- Flammability rating = complies with UL-510 Test
- Unwind @ 150 FPM = 50 oz./in.
- Cured silicone adhesive
- Exceptional high temperature properties
- Unexcelled physical & electrical properties are retained at higher temperatures than any other flexible insulation
Adhesive Tape Applications
- Slot cell ground insulation edge reinforcement
- Phase or crossover insulation in a.c. stators & d.c. armatures
- Connection insulating pad
- Lead & terminal board anchor
- Ground insulation base
- Cover insulation of heater blankets & high performance flexible printed wiring boards
Adhesive Tape Colors
- Amber
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.