Permacel/Nitto Denko America
P235
***Discontinued*** Film/Paper Electrical Tape
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P235 is a 5 mil, polyester film/paper combination, electrical insulating tape. It is engineered for use in the manufacture of small size dry type stick wound transformers and solenoid coils as hold-down ground, barrier, layer and outer wrap insulation. P235 is an economical general-purpose insulating tape. Ideal tapes for anchoring leads and spacers, and for coil covers or outer wraps and coil end insulation. Also recommended for start and finish lead cross-over insulation in small bobbin wound coils; in small motors for bundling end turns; for phase insulation; for ground insulation and bundling wire on small field coils and as ground insulation under commutator leads.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 5 Mils |
| Tensile | 35.00 lbs/in |
|---|---|
| Elongation | 5.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 302° F |
| Max Long-Term Temp |
Product Features
- Backing material: .5 mil polyester film laminated to 2 mil hemp paper
- Highly conformable
- Excellent dispensing characteristics as well as superior edge tear strength
- Corrosion factor = .85-.9 (wire tensile method)
- Rec. bake cycle = 2 hrs. @ 275° F or 1 hr. @ 302° F
- Outstanding varnish & a resin bond to backing
Adhesive Tape Applications
- Banding/bundling conductors & lead anchor in automotive field coil
- Automated machine application in high-volume bobbin coil manufacture for 1 V. power supplies & battery chargers
- Insulation & outer protective wrap on very fine magnet wire
- Anchoring leads & spacers
- Ground insulation under commutator leads
Adhesive Tape Colors
- Black
- Tan
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.