Permacel/Nitto Denko America
P248
***Discontinued*** Film/Paper Electrical Insul.
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P248 is a 6 mil, polyester film/ paper combination, electrical insulating tape. It is widely used as an economical general-purpose tape. P248 is especially effective with automated application equipment.
| Backing/Carrier | Film and Paper Laminate |
|---|---|
| Adhesive | Rubber |
| Thickness | 6 Mils |
| Tensile | 40.00 lbs/in |
|---|---|
| Elongation | 5.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 302° F |
| Max Long-Term Temp |
Product Features
- Backing material = 1-mil polyester fim, laminated & 2-mil hemp paper
- Used for difficult holding applications
- Can be used over burrs & sharp edges with minimum loss of dielectric strength
- Uniform easy unwind
- Abrasion resistant
- Unwind @ 150 FPM = 7 oz./in.
- Rec. bake cycle = 2 hrs. @ 275° F. or 1 hr. @ 302° F.
Adhesive Tape Applications
- Automated machine applications
- High volume coil applications
- Tabbing/holding winding finish turn
- Insulating outer protective wrap
- Bundling leads
- Ground & barrier insulation
- Anchoring terminal board
Adhesive Tape Colors
- Black
- Tan
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.