Permacel/Nitto Denko America
P259
***Discontinued*** Electrical Insulating Tape
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P259 is a 3.5 mil, printable, polyester film electrical insulating tape. It is ideal for lead anchoring where burrs or sharp edges are present. The high strength enables the tape to be used in bundling medium-gauge magnet wire. P259 is heavy-duty with excellent printability.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 3.5 Mils |
| Tensile | 50.00 lbs/in |
|---|---|
| Elongation | 100.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Superior tear & puncture resistance permits its use over welded & braded connections
- Used as high dielectric strength insulation in less than ideal installation conditions
- Super adhesion & hold while providing excellent hydrocarbon solvent resistance
Adhesive Tape Applications
- Lead connection insulating pad & lead & terminal board anchor on large bobbin & stick wound coils
- Bundling medium-gauge magnet wire
- In-place printing without solvent wipe for component identification
Adhesive Tape Colors
- Yellow
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.