Permacel/Nitto Denko America
P262
***Discontinued*** Non-Woven Electrical Insul.
DISCONTINUED BY PERMACEL Please use Compare-A-Tape to locate a substitute. P262 is a 3.5 mil, electrical insulating tape. It is a flatback Nomex(R) backing with an acrylic thermoset adhesive that is flame retardant and solvent resistant. Unique among insulating tapes: high thermal rating and flame retardancy, along with thinness. An outstanding tape for holding and insulating functions. Widely used to hold non-adhesive ground, barrier and layer insulation in place; to anchor winding starts and ends; to hold edge turns in place; to repair insulation on Nomex-wrapped conducters at splices and terminations; and, as coil end insulation on small stick wound coils. In small motors, P262 is valued for insulating connections, bundling end turns and in multiple layers as ground insulation for small field coils. Also recommended for use in components for home entertainment and telecommunications where flame retardancy is essential.
| Backing/Carrier | Flatback Paper |
|---|---|
| Adhesive | Acrylic |
| Thickness | 3.5 Mils |
| Tensile | 27.00 lbs/in |
|---|---|
| Elongation | 8.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 40 oz/in |
| Min. Application Temp | 40° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Aggressive high tack
- High adhesion
- Flame retardant acrylic adhesive
- Dielectric strength 3000 volts
- Flamability rating 8%
- UL component recog.: Guide OANZ2, File E20392
- High thermal rating
- Flame retardancy
- Thin backing provides adequate dielectric for 600 volt devices, with minimum insulation build-up where space is premium
- Exceptional thermal endurance
- Works well in automated machine dispensing and application equipment
Adhesive Tape Applications
- An outstanding tape for holding and insulating functions
- Widely used to hold non-adhesive ground, barrier and layer insulation in place
- To anchor winding starts and ends
- To hold edge turns in place
- To repair insulation on Nomex-wrapped conducters at splices and terminations
- Act as coil end insulation on small stick wound coils
Adhesive Tape Colors
- Natural
Converting Services
Precision Cutting, Die Cutting, Slitting, Printing, Laminating and Coating, Spooling and Finishing, Consulting & Process Audit, Prototyping, Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.